U2 Bike Parking Stand

Made from hot-dip galvanised black steel
Roller system – 7 teflon rollers on slides – leading and stabilising rollers
Gas-oil springs used for lifting the bikes /shock absorbers; 600 KN each
Bearing based assistance. Assistance makes lifting of the bikes easy and doesn’t require a lot of strength
Construction profile 60x60x2mm, other steel elements made from 4mm metal sheet
Height of the room where the bikes are to be installed – minimum 260 cm
Warranty for hot-dip galvanising, construction – 5 years, assistance mechanisms – 3 years
Installation – anchors, included
Possibility of ordering the stands with any number of bike posts (modules can be extended)

Stand in a spiral shape
Robust and durable
With all types of wheel and tire types
The legs are made of pipes ø 48.3; helix tubes ø 25
The coil diameter of about 50 cm
Overall height 65 cm
A distance of about 55mm wheel

Total lenght – 100, 150 or 200 cm
Stand 100 cm long without middle leg that appears on picture
Stand 150 cm long has one supporting leg
Stand 200 cm long has one two supporting legs

In the version for screw mounting screws included

In the version for concreting feet for burial at 45cm

Stand in a spiral shape
Robust and durable
With all types of wheel and tire types
The spiral is made of a pipe having a diameter ø33,7mm
Wheel diameter spiral: 50 cm
Overall height 65 cm

In the version for screw mounting screws included

In the version for concreting feet for burial at 45cm

• stand/rail width: 110cm
• stand height: 33cm
• distance between the posts: 6,5 cm
• stand coat: galvanised or stainless steel
• installation: 4 bolts Ø 8mm (included)
• tube (whole stand): Ø 20mm
• material: steel
• way of fixing: to the ground
• post adjustement: fixed
• way to park: double sided
• mounting method: for screwing
• vertical tube with panel fixed separately to the stand used for transportation

Bicycle stand made of spiral pipe fi 33.7 mm, all galvanized to prevent corrosion.
A rack intended for all types of wheels and wheel sizes
Mounted to the wall with screws (included)
Wheel diameter 70 cm
Spacing between the coils 35 cm

Optionally painting on any RAL colour   – extra paid

Acid proof steel (AISI304)

Polished surface

Tube diameter 48,3×1,5 mm and18x1,5 mm

Mounting screws are included

Stand size: 210x650x855(h) mm

width positions: 6cm
the distance between the positions: 36cm
section of the tube: 18mm
tube thickness: 2mm
Installation: wall plugs Ø 8mm (included)
coat rack: Galvanised
rate: 15x15cm
horizontal profiles: 30x30x1,5mm
vertical profiles: 30x60mm
Material: galvanized steel
way of fixing: to the ground
adjustment of positions: Fixed
way to park: one-sided
mounting method: for attaching

twidth positions: 6cm
the distance between the positions: 33cm
section of the tube: 18mm
thickness of tube: 2mm
profile stand: 30x30x1,5mm
coat rack: Galvanised
Material: galvanized steel
way of fixing: to the ground
adjustable stands: adjustable (90 and 45 degrees)
mounting method: for attaching

• spiral bike stand
• firm and lasting
• adapted to all types of wheels and tyres
• legs profile base 40×40 mm
• spiral profile base 30×20 mm
• mounting screws are included in the attaching model
• concrete foundation
• model includes parts to be set 45 cm deep in the ground
• material: galvanised steel

Base of the profile 30x30mm
Arms with pipes ø 20 mm
Fastened to the floor by means of screws, which are set.

Height: 33 cm

Widtht: 33 cm