Bike Stand Spiral Max

Bicycle stand made of spiral pipe fi 33.7 mm, all galvanized to prevent corrosion.
A rack intended for all types of wheels and wheel sizes
Mounted to the wall with screws (included)
Wheel diameter 70 cm
Spacing between the coils 35 cm

Optionally painting on any RAL colour   – extra paid

Made from hot-dip galvanised black steel
Roller system – 7 teflon rollers on slides – leading and stabilising rollers
Gas-oil springs used for lifting the bikes /shock absorbers; 600 KN each
Bearing based assistance. Assistance makes lifting of the bikes easy and doesn’t require a lot of strength
Construction profile 60x60x2mm, other steel elements made from 4mm metal sheet
Height of the room where the bikes are to be installed – minimum 260 cm
Warranty for hot-dip galvanising, construction – 5 years, assistance mechanisms – 3 years
Installation – anchors, included
Possibility of ordering the stands with any number of bike posts (modules can be extended)

Interesting 360 degrees model, possible bike posts all around it

Stand fit for 8 bikes

Stand leg made from tube ø 100mm; tube arms ø 18mm

Stand diameter – 80 cm

Total height above concrete foundation – 65 cm

Tube for concrete foundation – 50 cm

the distance between the positions: 42cm
section of the tube: 18mm
thickness of tube: 2mm
profile stand: 30x30x1,5mm
installation: anchors 8mm (included)
coat rack: Galvanised
Material: galvanized steel
way of fixing: to the ground
adjustable stands: adjustable (90 and 45 degrees)
way to park: one-sided
mounting method: for attaching

Base of the profile 30x30mm
Arms with pipes ø 20 mm
Fastened to the floor by means of screws, which are set.

Height: 33 cm

Widtht: 33 cm

width positions: 6cm
the distance between the positions: 33cm
section of the tube: 18mm
thickness of tube: 2mm
profile stand: 30x30x1,5mm
coat rack: Galvanised
Material: galvanized steel
way of fixing: to the ground
adjustable stands: adjustable (90 and 45 degrees)
mounting method: screwing

width positions: 6cm
the distance between the positions: 36cm
section of the tube: 18mm
tube thickness: 2mm
Installation: wall plugs Ø 8mm (included)
coat rack: Galvanised
rate: 15x15cm
horizontal profiles: 30x30x1,5mm
vertical profiles: 30x60mm
Material: galvanized steel
way of fixing: to the ground
adjustment of positions: Fixed
way to park: one-sided
mounting method: for attaching

Stand in a spiral shape
Robust and durable
With all types of wheel and tire types
The legs are made of pipes ø 48.3; helix tubes ø 25
The coil diameter of about 50 cm
Overall height 65 cm
A distance of about 55mm wheel

Total lenght – 100, 150 or 200 cm
Stand 100 cm long without middle leg that appears on picture
Stand 150 cm long has one supporting leg
Stand 200 cm long has one two supporting legs

In the version for screw mounting screws included

In the version for concreting feet for burial at 45cm

Acid proof steel (AISI304)

Polished surface

Tube diameter 48,3×1,5 mm and 18×1,5 mm

Possibility of making a plate with logo (for example bak logo in the pictures)

Stand to be connected (for shipment)

Snake shaped stand

Tube diameter: 48,3×2,0mm

Acid proof steel (AISI304)

Polished surface

For attaching or concrete foundation

Mounting screws are included in the attaching model

Stand made from 600 mm parts to be connected